ALS 542 Spot level sampler, stainless steel
- Capacity
- 500 ml
- Overall diameter
- 42.5 mm
- Material
- 316 stainless steel
| Capacity | 500 ml |
|---|---|
| Overall diameter | 42.5 mm |
| Inlet diameter | 21 mm |
| Overall length | 55 cm |
| Weight (empty) | 1.5 kg |
| Minimum sampling height above bottom | 47 cm |
| Material | 316 stainless steel |
Certification
ATEX and IECEx certified as part of a kit, not on its own.
Covered when used in the MK 1A open sampling kit and MK 7 closed sampling kit.
Not covered with the MK 10, MK 12 and MK 14 winders.
Those winders are certified with other samplers. Used with them, ALS 542 is not part of a certified assembly.
- ATEX certificate
- CML 21ATEX6978X
- IECEx certificate
- IECEx CML 21.0114X
- ATEX marking
- II 1 G Ex h IIC T3 Ga
- IECEx marking
- Ex h IIC T3 Ga
- Ambient temperature
- −20 °C to +70 °C
- Condition of use
- The earth lead is permanently attached and must be clamped to a suitable earth point before operation.
Every UKSGL product is designed and manufactured under ISO 9001:2015, LRQA approval 00002231.
About the ALS 542
ALS samplers are ideally suited to taking true spot samples from any level or depth within a stored liquid, to check for quality, density, or chemical purity, for example.
The ALS sampler has a valve at the top, opened by a snatch on the supporting cable.
In operation, the valve stays closed (and the sampler therefore stays empty) until the sampler reaches the depth at which the sample is required. For this reason, you can be sure that true samples are obtained, uncontaminated and undiluted by liquid from any other level in the tank or reservoir.
The “top hat” feature of the design minimises the effects of “fall-out” from the supporting cable.
The particular design of the sampler has an outlet spout at the bottom, which means a cleaner, quicker transfer of the sampler contents to the collecting bottle, with less mess on the deck!
Documents
Need it adapted or modified? UKSGL adapts equipment to customer requirements. Describe what you need in your quote request.